Microcement x fine wall and shower tinted to color 21 on our Microcement color chart, installed in a smooth sponge finish, and sealed with our Hi wear oil based sealer.
All walls in the bathroom as coated in our microcement, including the custom curved shower wall. We do not generally recommend foam board is used in showers; however, in this case the curved strapping was all installed, then Laticrete Hydroban Board bent over the wall, and we used a sheet membrane with thinset to wrap around and smooth over the finish. This was professionally done with a purpose, and the foam was thin and non flexible in this case. The membrane also had a considerable amount of thinset underneath, and was not an issue for delamination. Mesh was also wrapped across the entire space for added strength and support, using Ardex 8 + 9 as a crack suppression and for extra waterproofing.
Dark green marmorino matte, applied to all walls in this power room. Color ss BM Miramichi and has a satin burnish revealing the real marble grains that peak through the surface. Final sealer is our Stain shield Penetrating sealer design for dark colors.
Intonachino Medium with a skip trowel and light relief texture installed over this massive custom hood range. Color is tinted to SW Pure white, and uses small amounts of Slate grey to create the shade. The final sealers used here for added durability are Poly seal low sheen, followed by Poly wb semi gloss.
Intonachino Medium with a skip trowel finish and added texture for the wine cellar downstairs. All walls are coated in our plaster and then all the millwork was installed after. Final sealer was stain shield penetrating sealer.